Juniper J-Series Administration Manual page 28

J-series Services Router Administration Guide
Table 7: Permission Bits for Login Classes
Permission Bit
admin
admin-control
access
access-control
all
clear
configure
control
field
firewall
firewall-control
floppy
interface
interface-control
maintenance
network
reset
rollback
routing
6
User Authentication Overview
Access
Can view user account information in configuration mode and with the
command.
Can view user accounts and configure them (at the
Can view the access configuration in configuration mode and with the
operational mode command.
Can view and configure access information (at the
Has all permissions.
Can clear (delete) information learned from the network that is stored in various network
databases (using the clear commands).
Can enter configuration mode (using the
(using the command).
commit
Can perform all control-level operations (all operations configured with the
permission bits).
Reserved for field (debugging) support.
Can view the firewall filter configuration in configuration mode.
Can view and configure firewall filter information (at the
Can read from and write to the removable media.
Can view the interface configuration in configuration mode and with the
operational mode command.
configuration
Can view chassis, class of service, groups, forwarding options, and interfaces
configuration information. Can configure chassis, class of service, groups, forwarding
options, and interfaces (at the
Can perform system maintenance, including starting a local shell on the router and
becoming the superuser in the shell (by issuing the
reboot the router (using the
request system
Can access the network by entering the
Can restart software processes using the
software processes are enabled or disabled (at the
level).
Can use the rollback command to return to a previously committed configuration other
than the most recently committed one.
Can view general routing, routing protocol, and routing policy configuration information
in configuration and operational modes.
[edit system login]
[edit access]
command) and commit configurations
configure
[edit firewall]
[edit] hierarchy).
command), and can halt and
su root
commands).
ping , ssh , telnet , and
command and can configure whether
restart
[edit system processes]
show configuration
hierarchy level).
show configuration
hierarchy level).
-control
hierarchy level).
show
traceroute commands.
hierarchy