Configuring The Dhcp Server With A Configuration Editor - Juniper J-Series Administration Manual

J-series Services Router Administration Guide
Table 37: DHCP Server Quick Configuration Pages Summary (continued)
Field
Fixed IP Addresses
(required)
Host Name
Client Identifier
Hexadecimal Client
Identifier

Configuring the DHCP Server with a Configuration Editor

A typical DHCP server configuration provides the following configuration settings for
a particular subnet on a Services Router interface:
In addition, the DHCP server might assign a static address to at least one client on
the subnet. Table 38 on page 72 provides the settings and values for the sample
DHCP server configuration used in this section.
Table 38: Sample DHCP Server Configuration Settings
72

Configuring the DHCP Server with a Configuration Editor

Function
Defines a list of IP addresses permanently
assigned to the client. A static binding must
have at least one fixed address assigned to it,
but multiple addresses are also allowed.
Specifies the name of the client used in DHCP
messages exchanged between the server and
the client. The name must be unique to the
client within the subnet on which the client
resides.
Specifies the name of the client used by the
DHCP server to index its database of address
bindings. The name must be unique to the
client within the subnet on which the client
resides.
Specifies the name of the client, in
hexadecimal, used by the DHCP server to index
its database of address bindings. The name
must be unique to the client within the subnet
on which the client resides.
An IP address pool, with one address excluded from the pool.
Default and maximum lease times.
Domain search suffixes. These suffixes specify the domain search list used by a
client when resolving hostnames with DNS. See RFC 3397, Dynamic Host
Configuration Protocol (DHCP) Domain Search Option, for more information.
A DNS name server.
A DHCP option—Router solicitation address option (option 32). The IP address
excluded from the IP address pool is reserved for this option.
Settings
DHCP Subnet Configuration
Your Action
Do either of the following:
To add an IP address, type it next to the
Add button, and click Add.
To remove an IP address, select it in the
Fixed IP Addresses box, and click Delete.
Type a client hostname.
Type a client identifier in string form.
Type a client identifier in hexadecimal form.
Sample Value or Values