Juniper J-Series Administration Manual page 98

J-series Services Router Administration Guide
Verify that the output shows the intended configuration of the DHCP server.
Meaning
For more information about the format of a configuration file, see the J-series Services
Related Topics
Router Basic LAN and WAN Access Configuration Guide.
Verifying the DHCP Binding Database
Verify that the DHCP binding database reflects your DHCP server configuration.
Purpose
From operational mode in the CLI, to display all active bindings in the database,
Action
enter the
database, including their current binding state, enter the
binding detail
DHCP options, enter the
replacing ip-address with the IP address of the client.
The DHCP binding database resulting from the configuration defined in "Configuring
the DHCP Server with a Configuration Editor" on page 72 is displayed in the following
sample output.
To clear the DHCP binding database, enter the
command. To remove a specific entry from the DHCP binding database, enter the
clear system services dhcp binding ip-address
IP address of the client.
You can also use the J-Web interface to view information in the DHCP binding
database. For more information, see "Monitoring DHCP" on page 143.
user@host> show system services dhcp binding
76
Verifying the DHCP Binding Database
[edit]
user@host# show system services dhcp
pool 192.168.2.0/24 {
address-range low 192.168.2.2 high 192.168.2.254;
exclude-address {
192.168.2.33;
}
maximum-lease-time 2419200;
default-lease-time 1209600;
name-server {
192.168.10.2;
}
domain-search {
mycompany.net;
mylab.net;
}
option 16 ip-address 192.168.2.33;
}
static-binding 01.03.05.07.09.0b {
fixed-address {
192.168.2.50;
}
}
show system services dhcp binding
command. To display more information about a client, including its
show system services dhcp binding ip-address detail
command. To display all bindings in the
show system services dhcp
clear system services dhcp binding
command, replacing ip-address with the
command,