Juniper J-Series Administration Manual page 217

3.
4.
5.
6.
NOTE: If you cannot connect to the router through the console port, shut down the
router by pressing and holding the power button on the front panel until the
LED turns off. After the router has shut down, you can power on the router by pressing
the power button again. The
green when the router is operating normally.
Rebooting a Services Router with the CLI
You can use the
Services Router:
user@host> request system reboot <at time> <in minutes> <media type> <message
Table 101 on page 195 describes the
Table 101: CLI Request System Reboot Command Options
Option
none
Choose the boot device from the Reboot from media list:
compact-flash—Reboots from the internal compact flash. This selection is
the default choice.
removable-compact-flash—Reboots from the optional external compact
flash. This selection is available on J2320, J2350, J4300, and J6300 Services
Routers only.
usb—Reboots from the USB storage device.
(Optional) In the Message box, type a message to be displayed to any users on
the router before the reboot occurs.
Click Schedule. The J-Web interface requests confirmation to perform the reboot
or halt.
Click OK to confirm the operation.
If the reboot is scheduled to occur immediately, the router reboots. You
cannot access the J-Web interface until the router has restarted and the boot
sequence is complete. After the reboot is complete, refresh the browser
window to display the J-Web interface login page.
If the reboot is scheduled to occur in the future, the Reboot page displays
the time until reboot. You have the option to cancel the request by clicking
Cancel Reboot on the J-Web interface Reboot page.
If the router is halted, all software processes stop and you can access the
router through the console port only. Reboot the router by pressing any key
on the keyboard.
request system reboot
text">
Description
Same as (reboots the router immediately).
at now
Chapter 10: Performing Software Upgrades and Reboots
LED lights during startup and remains steadily
POWER
CLI command to schedule a reboot of the
request system reboot
Rebooting or Halting a Services Router
POWER
command options.
195