Juniper J-Series Administration Manual page 42

J-series Services Router Administration Guide
Creating a Local Template Account
You can create a local template that is applied to users authenticated by RADIUS or
TACACS+ that are assigned to the local template account. You use local template
accounts when you need different types of templates. Each template can define a
different set of permissions appropriate for the group of users who use that template.
The procedure provided in this section creates a sample user named
belongs to the
To create a local template account:
1.
2.
3.
4.
Table 17: Creating a Local Template Account
Task
Navigate to the System Login
level in the configuration
hierarchy.
Create a user named admin
belongs to the superuser login
class.
20
Managing User Authentication with a Configuration Editor
superuser login class.
Navigate to the top of the configuration hierarchy in either the J-Web or CLI
configuration editor.
Perform the configuration tasks described in Table 17 on page 20.
If you are finished configuring the network, commit the configuration.
To completely set up RADIUS or TACACS+ authentication, you must configure
at least one RADIUS or TACACS+ server and specify a system authentication
order
Go on to one of the following procedures:
To configure a RADIUS server, see "Setting Up RADIUS
Authentication" on page 12.
To configure a TACACS+ server, see "Setting Up TACACS+
Authentication" on page 13.
To configure a system authentication order, see "Configuring Authentication
Order" on page 15.
J-Web Configuration Editor
1. In the J-Web interface, select
Configuration>View and Edit>Edit
Configuration.
2. Next to System, click Configure or Edit.
3. Next to Login, click Configure or Edit.
1. Next to User, click Add new entry.
who
2. In the User name box, type
3. In the Class box, type
4. Click OK.
CLI Configuration Editor
From the
enter
edit system login
Set the username and the login
class for the user:
.
admin
set user admin class superuser
superuser .
that
admin
[edit] hierarchy level,