Juniper J-Series Administration Manual page 239

Table 108: J-Web Ping Host Field Summary (continued)
Field Function
Don't Resolve Determines whether to display hostnames of the
Addresses hops along the path.
Interface Specifies the interface on which the ping requests
are sent.
Count Specifies the number of ping requests to send.
Don't Fragment Specifies the Don't Fragment (DF) bit in the IP
header of the ping request packet.
Record Route Sets the record route option in the IP header of the
ping request packet. The path of the ping request
packet is recorded within the packet and displayed
in the main pane.
Type-of-Service Specifies the type-of-service (TOS) value in the IP
header of the ping request packet.
Routing Instance Name of the routing instance for the ping attempt.
Interval Specifies the interval, in seconds, between the
transmission of each ping request.
Packet Size Specifies the size of the ping request packet.
Source Address Specifies the source address of the ping request
packet.
Time-to-Live Specifies the time-to-live (TTL) hop count for the
ping request packet.
Bypass Routing Determines whether ping requests are routed by
means of the routing table.
If the routing table is not used, ping requests are
sent only to hosts on the interface specified in the
Interface box. If the host is not on that interface,
ping responses are not sent.
Figure 21: Ping Host Results Page
Your Action
From the list, select the interface on which ping
requests are sent. If you select any, the ping requests
are sent on all interfaces.
From the list, select the number of ping requests to
send.
From the list, select the decimal value of the TOS
field.
From the list, select the routing instance name.
From the list, select the interval.
Type the size, in bytes, of the packet. The size can
be from 0 through 65468. The router adds 8 bytes
of ICMP header to the size.
Type the source IP address.
From the list, select the TTL.
ERROR: Unresolved graphic fileref="s020254.gif" not found in
"\\teamsite1\default\main\TechPubsWorkInProgress\STAGING\images\".
Chapter 12: Using Services Router Diagnostic Tools
To suppress the display of the hop hostnames,
select the check box.
To display the hop hostnames, clear the check
box.
To set the DF bit, select the check box.
To clear the DF bit, clear the check box.
To record and display the path of the packet,
select the check box.
To suppress the recording and display of the
path of the packet, clear the check box.
To bypass the routing table and send the ping
requests to hosts on the specified interface
only, select the check box.
To route the ping requests using the routing
table, clear the check box.
Pinging Hosts from the J-Web Interface
217