Juniper J-Series Administration Manual page 310

J-series Services Router Administration Guide
Verifying RPM Probe Servers
Verify that the Services Router is configured to receive and transmit TCP and UDP
Purpose
RPM probes on the correct ports.
From the CLI, enter the
Action
user@host> show services rpm active-servers
The output shows a list of the protocols and corresponding ports for which the Services
Meaning
Router is configured as an RPM server.
For a complete description of
Related Topics
System Basics and Services Command Reference.
288
Verifying RPM Probe Servers
show services rpm active-servers
Protocol: TCP, Port: 50000
Protocol: UDP, Port: 50037
show services rpm active-servers
command.
output, see the JUNOS