Monitoring System Log Messages - Juniper ACX500 Hardware Manual

LEDs on the front panel include the following:
• System LED—One LED labeled SYS on the front panel indicates the status of the router.
• Management port LEDs—Two pairs of LEDs on the front panel indicate the status of the ports. The
port is labeled MGMT.
• Link LEDs—Each network port has one pair of port LEDs that indicate the status of the ports.
• PPS LED—One LED labeled GPS 1PPS on the front panel indicates the status of the PPS signal
received from the GPS receiver.
For more information about the front panel LEDs, see
SEE ALSO
Alarm Types and Severity Classes on ACX Series Routers | 199
Verifying Active Alarms | 200

Monitoring System Log Messages | 198

Monitoring System Log Messages
IN THIS SECTION
Purpose | 198
Action | 198
Purpose
Use the monitoring functionality to view system log messages for ACX Series routers.
Action
To view events in the CLI, enter the show log command. For more information see
from a Single-Chassis System.
"LEDs on ACX500 Routers" on page 59.
Displaying a Log File
198