Juniper J-Series Administration Manual page 155

Table 66: Summary of Key MPLS LSP Statistics Output Fields
Field Values
Ingress LSP Information about LSPs on the inbound router.
Each session has one line of output.
Egress LSP Information about the LSPs on the outbound
router. Each session has one line of output.
Transit LSP Number of LSPs on the transit routers and the
state of these paths.
To Destination (outbound router) of the session.
From Source (inbound router) of the session.
State
State of the path:
Packets Total number of packets received on the LSP from
the upstream neighbor.
Bytes Total number of bytes received on the LSP from
the upstream neighbor.
LSPname Configured name of the LSP.
Total Total number of LSPs displayed for the particular
type—
transit
Monitoring RSVP Session Information
To view currently active RSVP session information, select Monitor>MPLS>RSVP
Sessions, or enter the following CLI command:
show rsvp session
Table 67 on page 133 summarizes key output fields in the RSVP session information
display.
Table 67: Summary of Key RSVP Session Information Output Fields
Field Values
Ingress LSP Information about inbound RSVP sessions. Each
session has one line of output.
Egress LSP Information about outbound RSVP sessions. Each
session has one line of output.
Up , Down , or AdminDn
ingress (inbound), egress (outbound), or
.
Chapter 7: Monitoring the Router and Routing Operations
Additional Information
MPLS learns this information by querying RSVP,
which holds all the transit and outbound session
information.
MPLS learns this information by querying RSVP,
which holds all the transit and outbound session
information.
. AdminDn indicates that the LSP is being taken
down gracefully.
Additional Information
MPLS learns this information by querying RSVP,
which holds all the transit and outbound session
information.
Using the Monitoring Tools
133