Juniper J-Series Administration Manual page 93

Table 37: DHCP Server Quick Configuration Pages Summary (continued)
Field
Server Identifier
Domain Name
Domain Search
DNS Name Servers
Gateway Routers
WINS Servers
Boot Options
Boot File
Boot Server
DHCP Static Binding Information
DHCP MAC Address
(required)
Function
Specifies the IP address of the DHCP server
reported to a client.
Specifies the domain name that clients must
use to resolve hostnames.
Specifies the order—from top to bottom—in
which clients must append domain names
when resolving hostnames using DNS.
Defines a list of DNS servers the client can use,
in order of preference—from top to bottom.
Defines a list of relay agents on the subnet, in
order of preference—from top to bottom.
Defines a list of NetBIOS name servers, in order
of preference—from top to bottom.
Specifies the path and filename of the initial
boot file to be used by the client.
Specifies the TFTP server that provides the
initial boot file to the client.
Specifies the MAC address of the client to be
permanently assigned a static IP address.
Chapter 4: Configuring the Router as a DHCP Server
Your Action
Type the IP address of the Services Router. If
you do not specify a server identifier, the
primary address of the interface on which the
DHCP exchange occurs is used.
Type the name of the domain.
Do either of the following:
To add a domain name, type the name
next to the Add button, and click Add.
To delete a domain name, select the name
in the Domain Search box, and click
Delete.
Do either of the following:
To add a DNS server, type an IP address
next to the Add button, and click Add.
To remove a DNS server, select the IP
address in the DNS Name Servers box,
and click Delete.
Do either of the following:
To add a relay agent, type an IP address
next to the Add button, and click Add.
To remove a relay agent, select the IP
address in the Gateway Routers box, and
click Delete.
Do either of the following:
To add a NetBIOS name server, type an
IP address next to the Add button, and
click Add.
To remove a NetBIOS name server, select
the IP address in the WINS Servers box,
and click Delete.
Type a path and filename.
Type the IP address or hostname of the TFTP
server.
Type the hexadecimal MAC address of the
client.
Configuring the DHCP Server with Quick Configuration
71