Setting Up Template Accounts; Creating A Remote Template Account; Creating A Local Template Account - Juniper J-Series Administration Manual

J-series Services Router Administration Guide
To create user accounts:
1.
2.
3.
Table 15: Creating User Accounts
Task
Navigate to the System Login level in
the configuration hierarchy.
Create a user named
cmartin
belongs to the login class.
superuser
Define the encrypted password for
cmartin .

Setting Up Template Accounts

You can create template accounts that are shared by a set of users when you are
using RADIUS or TACACS+ authentication. When a user is authenticated by a
template account, the CLI username is the login name, and the privileges, file
ownership, and effective user ID are inherited from the template account.
This section contains the following topics:
18
Managing User Authentication with a Configuration Editor
Navigate to the top of the configuration hierarchy in either the J-Web or CLI
configuration editor.
Perform the configuration tasks described in Table 15 on page 18.
If you are finished configuring the network, commit the configuration.
J-Web Configuration Editor
1. In the J-Web interface, select
Configuration>View and
Edit>Edit Configuration.
2. Next to System, click Configure or
Edit.
3. Next to Login, click Configure or
Edit.
who 1. Next to User, click Add new entry.
2.
In the User name box, type
3. In the Class box, type
4. Click OK.
1. Next to Authentication, click
Configure.
2. In the Encrypted password box,
type
$1$14c5.$sBopasdFFdssdfFFdsdfs0
3. Click OK.
Creating a Remote Template Account on page 19
Creating a Local Template Account on page 20
CLI Configuration Editor
From the
[edit]
edit system login
Set the username and the login class for
the user:
cmartin .
set user cmartin class superuser
.
superuser
Set the encrypted password for
set user cmartin authentication
encrypted-password
$1$14c5.$sBopasdFFdssdfFFdsdfs0
hierarchy level, enter
.
cmartin