Glove Box Removal; Installation; Glove Box Latch Removal - Chrysler 300M Service Manual

23 - 46 INSTRUMENT PANEL
GLOVE BOX
REMOVAL
(1) Remove the four screws at bottom of glove box
door.
(2) Open the glove box door and slide sidewalls
inboard to remove the door/box assembly from instru-
ment panel.
(3) Place the glove box on a cloth to protect the
door surface.
(4) Remove the nine screws from backside of the
door.
(5) Separate the inner and outer door.
(6) Remove one screw to the latch.
(7) Remove latch from outer door.
NOTE: If the glove box door is going to be left off
for an extended period of time, the Ignition Off
Draw (IOD) fuse should be pulled to maintain bat-
tery condition.

INSTALLATION

(1) Install latch from outer door.
(2) Install one screw to the latch.
(3) Place teh the inner and outer door together.
(4) Install the nine screws to the backside of the
door.
(5) Slide sidewalls inboard to install the door/box
assembly into instrument panel.
(6) Install the four screws at bottom of glove box
door to instrument panel.
GLOVE BOX LATCH
REMOVAL
(1) Remove the four screws at bottom of glove box
door.
(2) Open the glove box door and slide sidewalls
inboard to remove the door/box assembly from instru-
ment panel.
(3) Place the glove box on a cloth to protect the
door surface.
(4) Remove the nine screws from backside of the
door.
(5) Separate the inner and outer door.
(6) Remove one screw to the latch.
(7) Remove latch from outer door.
NOTE: If the glove box door is going to be left off
for an extended period of time, the Ignition Off
Draw (IOD) fuse should be pulled to maintain bat-
tery condition.
INSTALLATION
(1) Install latch from outer door.
(2) Install one screw to the latch.
(3) Place teh the inner and outer door together.
(4) Install the nine screws to the backside of the
door.
(5) Slide sidewalls inboard to install the door/box
assembly into instrument panel.
(6) Install the four screws at bottom of glove box
door to instrument panel.
LH