Chrysler 300M Service Manual page 1107

19 - 20 COLUMN
COLUMN (Continued)
(28) If the vehicle is equipped with a steering col-
umn mounted shift lever, remove the shift cable from
the shifter mechanism. Unlock the cable lock, then,
the shift cable is removed by inserting a screwdriver
between the shift cable and the shifter mechanism
and prying the cable off the pin (Fig. 23).
Fig. 23 Shift Cable Removal
1 - STEERING COLUMN
2 - SCREWDRIVER
3 - PIN
4 - SHIFT CABLE
5 - SHIFTER MECHANISM
(29) Remove the shift cable mounting bracket (Fig.
24) from the steering column. The shift cable mount-
ing bracket is mounted to the steering column by the
2 mounting screws (Fig. 24).
Fig. 24 Shift Cable Bracket Mounting To Steering
1 - STEERING COLUMN
2 - SHIFT CABLE
3 - SHIFT CABLE MOUNTING BRACKET
4 - MOUNTING SCREWS
Column
(30) Remove the 2 air ducts (Fig. 25) from under
the steering column.
Fig. 25 Air Ducts
1 - STEERING COLUMN
2 - AIR DUCTS
(31) Remove retaining pin in steering column cou-
pler pinch bolt (Fig. 26). Remove the pinch bolt from
the steering column coupler. The pinch bolt nut is
caged to coupler and is not removable. Separate the
steering column flex coupler from steering intermedi-
ate shaft.
Fig. 26 Steering Column Coupler
1 - COUPLER
2 - PINCH BOLT
3 - STEERING COLUMN
LH