Chrysler 300M Service Manual page 1261

21 - 100 TRANSAXLE
GEAR SHIFT CABLE - COLUMN (Continued)
(5) Tilt the column to the uppermost postion and
remove the tilt lever (Fig. 242).
Fig. 242 Tilt Lever Screw Removal/Install
1 - STEERING WHEEL
2 - TURN SIGNAL LEVER
3 - TILT LEVER
4 - SCREWDRIVER
(6) Remove the ignition key and remove lower col-
umn cover (Fig. 243).
Fig. 243 Lower Column Cover Removal/Installation
1 - LOWER COLUMN COVER
(7) Remove cable from shift pin (Fig. 244).
(8) Remove cable retainer clip from shift cable con-
duit bracket (Fig. 244).
CAUTION: Column must be tilted fully upward to
remove cable retainer clip.
(9) Raise hood. From inside the engine compart-
ment, remove the gear shift cable from the cable
bracket (Fig. 245).
Fig. 244 Column Gear Shift Cable
1 - CONDUIT BRACKET
2 - RETAINER CLIP
3 - GEARSHIFT CABLE
4 - SHIFT PIN
Fig. 245 Throttle/Gearshift Cable Bracket
1 - CABLE BRACKET
2 - GEARSHIFT CABLE
3 - THROTTLE CABLE
LH