LH
TRIM PANEL - WOOD TRIM
REMOVAL - WOOD TRIM
(1) Remove door trim panel. (Refer to 23 - BODY/
DOOR - FRONT/TRIM PANEL - REMOVAL)
(2) Remove and discard the retainer clips (Fig. 17)
(3) Remove the wood trim from the trim panel.
(Fig. 18)
Fig. 17 WOOD TRIM CLIPS - TYPICAL
1 - RETAINER CLIPS
2 - TRIM PANEL
INSTALLATION - WOOD TRIM
(1) Install wood trim into mounting hole of the
trim panel (Fig. 18).
(2) Install new retainer clips and seat fully (Fig.
17).
(3) Install the door trim panel. (Refer to 23 -
BODY/DOOR - FRONT/TRIM PANEL - INSTALLA-
TION)
Fig. 18 WOOD TRIM - TYPICAL
1 - MOUNTING HOLES
2 - WOOD TRIM
WATERDAM
REMOVAL
(1) Remove door trim panel.(Refer to 23 - BODY/
DOOR - FRONT/TRIM PANEL - REMOVAL)
(2) Carefully remove by pulling water dam from
door inner panel.
(3) Pull watershield around umbrella clips in sheet
metal inner panel.
INSTALLATION
(1) Position watershield on door inner panel.
Ensure that the water dam locator holes align and
watershield is over the umbrella clips.
(2) Press inward on areas with adhesive to attach
dam to inner door. Ensure that the dam is sealed.
(3) Install trim panel.(Refer to 23 - BODY/DOOR -
FRONT/TRIM PANEL - INSTALLATION)
DOOR - FRONT 23 - 25