Chrysler 300M Service Manual page 1241

21 - 80 TRANSAXLE
FINAL DRIVE (Continued)
Fig. 179 Stake Grinding Pattern
1 - TRANSFER SHAFT
2 - TRANSFER SHAFT NUT
(17) Using a small chisel, carefully open stakes on
nut (Fig. 180)
Fig. 180 Opening Nut Stakes
1 - CHISEL
2 - NUT STAKE
(18) Remove the transfer shaft nut (Fig. 181).
CAUTION: Do not reuse old transfer shaft nut
because the removed stake weakens the nut flange.
CAUTION: The transfer shaft cannot be removed
from the case at this time.
(19) Install special tool 6577 to remove rear trans-
fer bearing cup (Fig. 182).
Fig. 181 Press Transfer Shaft Downward to Remove
Rear Cone
1 - TRANSFER SHAFT
2 - ARBOR PRESS
Fig. 182 Transfer Bearing Cup Removal
1 - SPECIAL TOOL 6577
LH