Chrysler 300M Service Manual page 1291

21 - 130 TRANSAXLE
SHIFT INTERLOCK CABLE (Continued)
(4) Remove under panel silencer/duct assembly
(Fig. 349).
(5) Remove column cover screws.
(6) Tilt column down and remove upper half of col-
umn cover.
(7) Tilt the column to the uppermost position and
remove the tilt lever (Fig. 350).
Fig. 349 Panel Removal/Installation
1 - SILENCER/DUCT ASSEMBLY
Fig. 350 Tilt Lever Screw Removal/Installation
1 - STEERING WHEEL
2 - TURN SIGNAL LEVER
3 - TILT LEVER
4 - SCREWDRIVER
(8) Remove the ignition key and remove lower col-
umn cover (Fig. 351).
Fig. 351 Lower Column Cover Removal/Installation
1 - LOWER COLUMN COVER
(9) Remove the interlock cable from the shifter
housing. Slide the cable out of the groove in the
interlock lever (Fig. 352).
Fig. 352 Interlock Cable Removal/Installation
1 - LOCKING CLIP
2 - INTERLOCK CABLE
3 - BRACKET
4 - SHIFTER ASSEMBLY
LH