Chrysler 300M Service Manual page 1178

LH
42LE AUTOMATIC TRANSAXLE (Continued)
(19) Remove #1 caged needle bearing (Fig. 32).
Fig. 32 Remove No. 1 Caged Needle Bearing
1 - #1 CAGED NEEDLE BEARING
2 - NOTE: TANGED SIDE OUT
(20) Remove input clutch assembly (Fig. 33).
Fig. 33 Remove Input Clutch Assembly
1 - INPUT CLUTCH ASSEMBLY
(21) Remove #4 thrust plate (Fig. 34).
Fig. 34 Remove #4 Thrust Plate
1 - OVERDRIVE SHAFT ASSEMBLY
2 - #4 THRUST PLATE (SELECT)
3 - 3 DABS OF PETROLATUM FOR RETENTION
(22) Remove front sun gear assembly and #4
thrust washer (if still in place) (Fig. 35).
Fig. 35 Remove Front Sun Gear Assembly
1 - FRONT SUN GEAR ASSEMBLY
2 - #4 THRUST WASHER (FOUR TABS)
TRANSAXLE 21 - 17