Check Virtual Disk Consistency - Dell PowerVault MD3260 Cli Manual

This command returns the status of a remote replication virtual disk. Use this command to determine when the status of
the remote replication virtual disk becomes Optimal.
Syntax
check remoteReplication localVirtualDisk [virtualDiskName]
optimalStatus timeout=timeoutValue
Parameters
Parameter
localVirtualDisk
timeout
NOTE: This command waits until the status becomes Optimal or the timeout interval expires. Use this command
when you run the Asynchronous Remote Replication utility.

Check Virtual Disk Consistency

This command checks a virtual disk for consistency and media errors, and writes the results of the check to a file.
Syntax
check virtualDisk [virtualDiskName]
consistency [consistencyErrorFile=filename]
[mediaErrorFile=filename]
[priority=(highest | high | medium | low | lowest)]
[startingLBA=LBAvalue] [endingLBA=LBAvalue]
[verbose=(TRUE | FALSE)]
Parameters
Parameter
virtualDisk
consistencyErrorFile
mediaErrorFile
priority
Description
The name of any remote replication virtual disk. The
remote replication virtual disk can be the primary virtual
disk or the secondary virtual disk of a remote replication
pair. Enclose the virtual disk name in square brackets ([ ]).
If the virtual disk name has special characters, you also
must enclose the virtual disk name in double quotation
marks (" ").
The time interval within which the software can return the
remote replication virtual disk status. The timeout value is
in minutes.
Description
Name of the specific virtual disk to check consistency.
You must put brackets ([ ]) around the virtual disk name. If
the virtual disk name has special characters, you must
also put quotation marks (" ") around the virtual disk name.
Name of the file in which to save the consistency error
information. You must put quotation marks (" ") around the
file name.
Name of the file in which to save the media error
information. You must put quotation marks (" ") around the
file name.
Specifies the priority that the consistency check has
relative to host I/O activity. Valid entries are highest,
high, medium, low, or lowest.
101