Removal Of The Swing Motor - Daikin E Series Service Manual

SiBE04-624

1.11 Removal of the Swing Motor

Procedure
Step
1. Remove the swing motor
1 There are 3 hooks for
the lead wire for swing
motor.
Cut the clamp with
2
nippers.
Undo the lead wire for
3
swing motor from the
hooks.
4 Loosen the 1 screw of
the swing motor for the
horizontal blades
(large). Loosen the 2
screws of the swing
motor for the horizontal
blades (small).
2. Remove the swing motor
for vertical blades
Loosen the 1 screw of
1
the drain hose.
2 Loosen the 2 screws of
the assembly of swing
motor.
Removal Procedure
Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Indoor Unit
Points
Preparation
Remove the electrical box
according to "Removal of
the Electrical Box".
The connector for swing
motor is disconnectable.
The same swing motors are
used for both large and
small horizontal blades.
Working without removing
the drain hose is possible.
249