Field Setting - Daikin E Series Service Manual

SiBE04-624
1.2

Field Setting

1.2.1 Humidifying Hose Length
Setting the humidifying hose length.
(1) Hold "CLOCK button" for more than 5 seconds.
(2) Press "SELECT
(3) Press "CLOCK button" to activate the hose length setting mode.
(4) Press "SELECT
(5) Press "CLOCK button" after selecting the hose length.
(6) Hold "CLOCK button" for more than 5 seconds.
If you set the wrong humidifying hose length, cancel the setting displaying
"
When the unit cannot be powered on.
Others
Set the humidifying hose length to ensure humidifying capacity. Use the remote controller
to set the humidifying hose length. When doing this, power on the unit as communication
is established between the unit and the remote controller.
(The humidifying hose length includes the rear of the indoor unit.)
(To cancel, do not operate the button for 10 seconds. The display will return to normal.)
. button".
Select "
(Be sure to direct the remote controller toward the main unit while operating it.)
The display will show the currently set hose length.
(Default is no setting.)
. button" to set the humidifying hose length.
Pressing "SELECT . button" changes the hose length.
You may set the hose length to 5 levels, ~3M, 3.1~4M, 4.1~6M, 6.1~8M, 8.1~10M.
(Direct the remote controller toward the main unit while operating it.)
The humidifying hose length setting is complete.
" with the step 4) operation and reset it.
When setting the humidifying hose length without powering on the unit, the display shows
" " with the step 5) operation shown above but the remote controller
remembers the set hose length.
(When the customer uses the unit, the humidifying hose length information is sent to the
indoor unit to be set.)
Matrix display
"SELECT button"
"CLOCK button"
"
(R5905)
Others
299