Removal Of Electrical Box / Pcb / Swing Motor - Daikin D Series Service Manual

FT15DV2S, FT50/60DSG
2.4

Removal of Electrical Box / PCB / Swing Motor

Procedure
Step
1. Removing the front grille.
2. Removing the drip proof
plate.
1 Loosen the screw.
3. Disconnect the indoor
heat exchanger thermistor
and the earth.
184
Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Si01-501
Points
Parts layout
Mind that not to lose the clip
for the thermistor.
Removal Procedure