SiBE04-624
1.14 Removal of Horizontal Blades / Vertical Blades
Procedure
Step
1. Remove the horizontal
blade
Open the horizontal
1
blade (large).
Undo the center fixture
2
for the horizontal blade
(large).
3
Undo the left shaft
while bending the
horizontal blade (small)
slightly.
Remove the horizontal
blade (small).
Undo the right shaft of
4
the horizontal blade
(large), and then
remove the blade.
Removal Procedure
Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Indoor Unit
Points
When installing the
horizontal blades, be careful
not to put the large and
small blades in the wrong
position.
There is a key alignment
mark at the right side.
257