Indoor Unit
1.7
Removal of the PCB
Procedure
Step
1. Remove the shelter
1
External appearance of
the electrical box.
2
Undo the hook of the
shelter.
While opening the
3
shelter, undo the lower
hook and lift the shelter
up to undo the upper
hook on the back.
Slide the shelter
4
upward while lifting up
(without hooked) and
undo the 2 sockets.
238
Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
SiBE04-624
Points
Preparation
Remove the electrical box
according to "Removal of
the Electrical Box".
Removal Procedure