Monitor Brightness Setting; Information Display - Daikin E Series Service Manual

Main Functions

2.14 Monitor Brightness Setting

The brightness of the multi-colored indicator lamp can be adjusted HIGH, LOW, or OFF.
It is convenient when it is excessively bright while asleep.
∗ Refer to the operation manual for details.

2.15 Information Display

Operation
∗ Refer to the operation manual for details.
Features
Note
40
Set temperature
Room temperature, indoor humidity, and outdoor temperature are displayed.
Point the remote controller at the indoor unit for 2 seconds.
Outdoor temperature during operation may be displayed relatively high in cooling or
"SARARA" drying, and relatively low in heating (particularly when the outdoor unit is
frosted) by influence of air blown out from the outdoor unit and temperature of the heat
exchanger.
Lowest displayable outdoor temperature is -9°C. Even if the outdoor temperature is lower
than this, "-9" is displayed. Highest displayable outdoor temperature is 39°C. Even if the
outdoor temperature is higher than this, "39" is displayed.
Displayed temperature and humidify are those near the sensor.
Displayed temperature or humidity may be different from the actual temperature or
humidity depending on the conditions of indoor unit and outdoor unit installation (due to
obstacle near the sensor or influence of direct sunlight).
Take it as a rough standard.
Multi-colored indicator lamp
INFORMATION
Indoor temperature Outdoor
Indoor humidity temperature
SiBE04-624
(R5990)
Return to
normal
display
(R5972)
Function and Control