Parameter
Data Bit
Stop Bit
Baud Bit
Parity
7.4.2.5
Network
Network interface is shown as in Figure 7-29.
Please refer to the following sheet for detailed information:
Parameter
IP Version
MAC Address
IP Address
Subnet Prefix
© Copyright Qvis ®. All documentation rights reserved.
Function
PTZ matrix: PTZ matrix protocol. You can use the device to
control the PTZ matrix.
The value ranges from 5 to 8.
There are three options: 1/2.
You can select the corresponding baud bit here.
There are five options: none/odd /even/mark/space.
Figure 7-29 Network
Function
There are two options: IPv4 and IPv6. Right now, system
supports these two IP address format.
The host in the LAN can get a unique MAC address. It is for
you to access in the LAN. It is read-only.
Here you can use the up/down buttons () or input the
corresponding number to input IP address. Then you can set
the corresponding subnet mask as the default gateway.
The input value ranges from 0 to 128. It is to mark a
specified network MAC address. Usually it includes an
organisation of the multiple-levels.
114