Monitor Window Switch; Ptz Control - Qvis Iapollo SMART NVR User Manual

6.2.3 Monitor Window Switch

The monitor window switch interface is shown as in Figure 6-9.
System supports 1/4/6/8/9/13/16/20/25/36-window real-time preview.
- Video quality adjustment button. The interface will allow you to set different video
resolutions.
- Fluency button. You can use this function to adjust the priority between real-time and
fluency.

6.2.4 PTZ Control

Before PTZ operation, please make sure you have properly set the PTZ protocol. (Please refer to
chapter 6.4.2.7 PTZ).
Here you can view direction keys, speed, zoom, focus, iris, preset, tour, pan, scan, pattern, aux
close, and PTZ setup button.
Note: open menu/close menu/up/down/left/right/confirm/cancel buttons are for speed dome only.

PTZ direction: PTZ supports eight directions: left/right/up/down/upper left/upper right/bottom
left/bottom right.

Speed: The step 8 speed is faster than step 1.
© Copyright Qvis ®. All documentation rights reserved.
Figure 6-9 Monitor Window Switch
89