Schedule - Qvis iBox nvr User Manual

Schedule

5.6.3
Within the main menu, you can find the schedule option settings, which is shown in Figure
5-28, through the 'Settings' menu,.

Channel: Please select the channel number first. You can select 'All' if you want to set for
the whole channels.

Period (Week day): There are eight options: ranging from Saturday to Sunday, and all.

Pre-record: The system can add pre-recorded video, stored in the memory cache, to the
beginning of the captured event, so you can view the run up to the incident. The value ranges
from 1 to 30 seconds depending on the bit stream.

Redundancy: System supports a redundancy backup function. It allows you to backup
recorded files on to two disks. You can highlight the Redundancy button to activate this
function. Please note, before enabling this function, please set at least one HDD as
redundant. (Main menu->Advanced->HDD Management). Please note this function is null
if there is only one HDD.

Snapshot: You can enable this function to instruct the system to take a snapshoot image
when an alarm is triggered.

Record types: There are four types: regular, motion detection (MD), Alarm, MD & alarm.

Holiday: Select button to Highlight, the holiday settings in General interface (Chapter 5.6.1)
becomes activated.
Please highlight icon to select the corresponding function. After completing all the setups
please click save button, system goes back to the previous menu.
At the bottom of the menu, there are color bars for your reference. Green color stands for
regular recording, yellow stands for motion detection and red stands for alarm recording. The
© Copyright Qvis ®. All documentation rights reserved.
Figure 5-27
40