Qvis iBox nvr User Manual page 83

The remote device interface is shown in Figure 5-71.

IP search: Click it to search for an IP address.

Add: Click it to connect to the selected device and add it to the 'Added device' list. It also
allows batch add.

Show filter: You can use this to display the specified devices from the added devices.

IPC config: Double click the
interface (see Figure 5-72).
© Copyright Qvis ®. All documentation rights reserved.
Figure 5-71
on the IPC config column, you can go to the IPC setup
Figure 5-72
74