Ntp Setup - Qvis iBox nvr User Manual

5.6.5.3 NTP Setup

You need to install an SNTP server (i.e.: Absolute Time Server) in to your PC first. In a Windows
OS, you can use command "net start w32time" to boot up NTP service. NTP setup interface is
shown as in Figure 5-34.

Host IP: Input your PC address.

Port: This series NVR supports TCP transmission only. Port default value is 123.

Update interval: minimum value is 1. Max value is 65535. (Unit: minute)

Time zone: select your corresponding time zone here.

Update period: You can input interval here.

Manual update: It allows you to synchronize the time with the server manually.
Here is a sheet for your time zone setup:
City /Region Name
London
Berlin
Cairo
Moscow
New Deli
Bangkok
Beijing (Hong Kong)
Tokyo
Sydney
Hawaii
Alaska
Pacific Time(P.T)
American Mountain Time(M.T)
American Central Time(C.T)
American Eastern Time(E.T)
Atlantic Time
Brazil
Middle Atlantic Time
© Copyright Qvis ®. All documentation rights reserved.
Figure 5-34
Time Zone
GMT+0
GMT+1
GMT+2
GMT+3
GMT+5
GMT+7
GMT+8
GMT+9
GMT+10
GMT-10
GMT-9
GMT-8
GMT-7
GMT-6
GMT-5
GMT-4
GMT-3
GMT-2
47