Display - Qvis iBox nvr User Manual

Here is a button function explanation key for you reference:
Name Function
key
Zoom
Focus
Iris

5.6.9 Display

Display setup interface is shown below (see Figure 5-66).

Transparency: This is for you to adjust the transparency. The value ranges from 128 to 255.

Channel name: This is for you to modify the channel name. System supports up to a
maximum of 25-digits (The value may vary due to different series). Please note that all your
modifications only apply to the NVR's local end. You need to open web or client end to
refresh channel name.

Time display: You can select this to display time when system is in playback mode.

Channel display: You can select this to display the channel name when system is in
playback mode.

Resolution: There are four options to set: 1280×1024(default),1280×720,1024×768,800
×600. Please note the system needs to reboot in order to activate the current setup.

Enable tour: Click this box to activate tour function.

Interval: System supports 1/4/8/9/16-window tours. Input proper interval value here. The
value ranges from 5-120 seconds. In the tour process, you can use mouse or click Shift to
© Copyright Qvis ®. All documentation rights reserved.
function Shortcut
key
Wide

│
Near

Close
Figure 5-66
Function function
key
Far
Far
Open
Shortcut
Key

►
│

70