Quick Setup - Qvis iBox nvr User Manual

white means the MD and alarm record is valid. Once you have set to record when the MD and
alarm occurs, system will record neither when motion detection has occurred nor when the
alarm has occurred.
Figure 5-28

5.6.3.1 Quick Setup

The Copy function allows you to copy one channel setup to another. After setting up in channel 1,
click the Copy button, you can go to interface (see Figure 5-29). You can see the current channel
(channel 1 shown below) name is highlighted in grey. Now you can select the channel you want to
paste over, such as channel 5/6/7 (also shown below). If you want to save the current setup of
channel 1 to all channels, you can click the first box 'ALL'. Click the OK button to save current
copy setup. Click the OK button in the Encode interface, the copy function is now successfully
completed.
Note: if you select 'ALL' in Figure 5-29, the record setup for all channels are the same and the
Copy button becomes hidden.
Figure 5-29
© Copyright Qvis ®. All documentation rights reserved. 41