Qvis iBox nvr User Manual page 114

16 channel 4poe network video recorders
Table of Contents

Advertisement

Important: The window display mode and the channel number are the default setting. For
example, for the 16-channel, the max window split mode is 16.
3. Multiple-channel monitor system adopts an extra stream to monitor by default. When you
double click one channel, the system switches to a single channel and then uses main
stream to monitor. For your reference there are two video viewing icons on the top left
corner of the channel number: 'M' stands for 'Main stream', 'A' stands for 'Alternative'
stream.
4. When you switch from Monitor to 'Search' or to 'Configuration', the system pops up a
dialogue box asking if you wish to leave the current interface or not (see Figure 7-16).
Click the OK button, and the system will close the current monitor window. The same
dialogue box will appear when you click the 'Config' button whilst monitoring video.
5. Click the OK button and the system will close the current monitor interface and opens the
configuration interface. The monitor interface appears automatically after you close
configuration interface. When you switch from Search to the Configuration interface, the
system also pops up the same dialogue box for your confirmation. Also when you click the
OK button, you will see the system close the playback interface and open the
configuration interface.
Note: system will not open the playback interface again after you close the configuration
interface.
If you login via the WAN mode, system does not support alarm activation to open the video
function in the Alarm setup interface.
Important:
For multiple-channel monitor mode, system adopts an extra default stream. You
cannot modify this manually. All channels will be trying to synchronize. Please note
the synchronization effect still depends on your network environment.
For bandwidth consideration, the system cannot support monitor and playback at the
same time. System auto closes monitor or playback interface when you are searching
setup in the configuration interface. This is to enhance search speed.
© Copyright Qvis ®. All documentation rights reserved.
Figure 7-16
105

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Izeus nvrIboxIzeus

Table of Contents