Qvis iBox nvr User Manual page 125

Parameter
Function
Remote
PPPOE
host
There are two conditions for reboot:
1. The user must have the authority to reboot device.
2. There is no user login the system menu on the local end
Email
The email interface is shown as in Figure 7-31.
Please refer to the following sheet for detailed information:
Parameter
SMTP Server
© Copyright Qvis ®. All documentation rights reserved.

Input the user name, password and which ISP (Internet service supplier)
provider then chose enable.

Reboot system after configuration is saved and the device will auto
connect to Internet. The IP address is the WAN IP.

After PPPOE dial has succeeded, get the current IP address and visit
this IP address via WEB.
Figure 7-31 Email
Function

Input server address and then enable this function.

You can also input the corresponding server domain
name here, but you need to go to DNS interface
(chapter 7.3.4.1) to set the server IP that can parse the
domain.
116