Gui Operation; Login - Qvis iBox nvr User Manual

5 GUI (Graphic User Interface) Operation
Connect the device to the monitor and then connect a mouse and power cable. Click the power
button at the rear panel and then boot up the device to view the analog video output. You can use
the mouse to implement some GUI operation.

5.1 Login

After the device boots up, the system is in the multiple-channel display mode. See Figure
5-1.Please note the displayed window amount may vary. The following figure is for reference only.
You can use USB2.0 mouse to input. Click
(small/capitalized) and denotation.
Note:
For security reason, please modify password after you first login.
3 failed login attempts within 30mins will result in triggering the system alarm and after 5 failed
attempts, also within 30mins, will result in account loss.
You can overlay the corresponding date, time and channel name on each screen. You can refer to
the following sheet for channel record or alarm status information.
© Copyright Qvis ®. All documentation rights reserved.
Figure 5-1
to switch between numeral, English character
Figure 5-2
19