Qvis iBox nvr User Manual page 46


Holiday setting: Click this to see the interface shown as in Figure 5-22. Here you can set the
holiday date. Please go to the Holidays Period interface to set the holiday date record setup.

When you enable Holiday settings and schedule setup at the same time, holiday setting
has the priority. If the selected day is a holiday, then system records as you set in holiday
setting. If it is not a holiday, system records as you set in Schedule interface. Please note
you need to go to chapter 5.6.3 Schedule to learn about enabling the Holiday setup.
Otherwise you may not correctly setup the holiday settings.

Please note there is no year setup on the holiday setting. For example, if you set 30th
Oct, 2012 as a holiday, then the date of 30th Oct in each succeeding year will be set as a
holiday. So, generally speaking, your holiday setup in the current year may also affect
the holiday setup in the next.


Mouse property: By Clicking the mouse setup button the mouse setup interface will appear
(See Figure 5-23). You can set double click speed via dragging the slide bard. You can Click
Default button to restore default setup.

Startup wizard: Once you check the box here, the system will go to the startup wizard
directly when the system restarts the next time. Otherwise, it will go to the login interface.

Auto logout: This is where you can set the auto logout interval, once login user remains
inactive for a specified time. Value ranges from 0 to 60 minutes.

Navigation bar: When you check the box, the system displays the navigation bar on the
interface.

IPC Time Sync: You can input an interval here to synchronize the NVR time and IPC time.
© Copyright Qvis ®. All documentation rights reserved.
Figure 5-22
Figure 5-23
37