Qvis iBox nvr User Manual page 129

Parameter
File length
Password
Remote Path
Channel
Period
info.
Setup
Copy
NTP
The NTP interface is shown in Figure 7-35.
Here you can check the network time synchronization. Please enable current function and then
input server IP, port number, time zone and time.
© Copyright Qvis ®. All documentation rights reserved.
Function
The max files length when you transfer the file. When
the input value is 0, then system uploads whole files.
The password you need to login the server.
Remote storage file path.
Select a monitor channel.
 In NAS interface, click set button, you can go to the
corresponding setup interface. See Figure 7-34.
 Please set schedule period and then select
corresponding record type: schedule/alarm. Please
note device does not support motion detect record
function now.
Please select date (Current setup applies to current

day by default. You can draw a circle before the
week to apply the setup to the whole week.)
After complete setup, please go back to Figure 7-28

and then click save to save current time period
setup.
User can use this shortcut to copy the storage state of a
channel to another (or all other channels).
Figure 7-35 NTP
120