Hdd Installation; Izeus Nvr Series - Qvis iBox nvr User Manual

3 HDD Installation

Important：
Please turn off the power before you replace the HDD.
The pictures listed below for reference only.
When installing for the first time, please be aware about what type of HDDs you are installing.
You can refer to the Appendix for recommended HDD brands. Please use HDD with a 7200rpm or
higher. Usually we do not recommend the PC HDD. Please follow the instructions below to install
hard disk.

3.1 iZeus NVR Series

1. Loosen the screws of the
upper cover and side panel.
4. Turn the device upside down
and then turn the screws in
firmly.
in the chassis.
7. Put the cover in accordance
with the clip and then place the
upper cover back.
© Copyright Qvis ®. All documentation rights reserved.
2. Fix four screws in the HDD
(Turn just three rounds).
5.
Fix the HDD firmly.
8. Secure the screws in the rear
panel and the side panel.
3. Place the HDD in accordance with
the four holes in the bottom.
6. Connect the HDD cable and
power cable.
16