Rear Panel; Izeus Nvr Series - Qvis iBox nvr User Manual

HDD abnormal
indication light
Network
abnormal
indication light
Alarm indicator
light

2.2 Rear Panel

2.2.1 iZeus NVR Series

The rear panel of the iZeus NVR series is shown as below. See Figure 2-3.
Please refer to the following sheet for detailed information:
Port Name
USB2.0 port.
Network port
232 debug
S232(RS-422)
R
COM.
High Definition
HDMI
Media
Interface
VGA VGA video
output port
© Copyright Qvis ®. All documentation rights reserved.
HDD error has occurred or HDD capacity is below specified
threshold value, the light becomes red to alert you.
Network error has occurred or there is no network connection, the
light becomes red to alert you.
The light turns on when an alarm occurred.
Figure 2-3
Connection Function
Connect to USB2.0 mouse.
10M/100M/1000Mbps self-adaptive Ethernet
port. Connect to the network cable.
It is for general COM debug to configure IP
address or transfer transparent COM data.
High definition audio and video signal output
port. It transmits uncompressed high definition
video and multiple-channel data to the HDMI
port of the display device.
VGA VGA video output port. Output analog video
signal. It can connect to the monitor to view
analog video.
9