Qvis iBox nvr User Manual page 62

The WIFI interface is shown as below (see Figure 5-41).

Auto connect WIFI: When you select this box, the system automatically connects to the
previous WIFI hotspot.

Refresh: You can click this to search the hotspot list again. It can automatically add the
information such as the password if you have set it beforehand.

Disconnect: Click this to turn off the connection.

Connect: Here you can click this to connect to the hotspot. System needs to turn off current
connection and then connect to a new hotspot, if there is a connection available that you can
select (see Figure 5-42).

© Copyright Qvis ®. All documentation rights reserved.
Figure 5-41
Figure 5-42
53