Alarm - Qvis iBox nvr User Manual

Figure 7-66
Now you can see system begins the download and the download button becomes the stop button.
You can click it to terminate current operation.
At the bottom of the interface, there is a process bar for your reference.

7.6 Alarm

Click alarm function, you can see an interface shown in Figure 7-67. Here you can set device
alarm type and alarm sound setup.
When an alarm occurs, the system can display the alarm information in the corresponding
interface.
For motion detect, video loss and camera masking you need to set the event in the motion
detection interface. Current series product does not support this function.
© Copyright Qvis ®. All documentation rights reserved. 145