Color And More Setup - Qvis iBox nvr User Manual

Please refer to the following sheet for PTZ setup information:
Parameter Function

Scan

Use direction keys to move the camera to your desired location and
Preset
then input preset value. Click add button to set one preset.

Tour


You can input pattern value and then click start record button to begin
Pattern
PTZ movement. Please go back to Figure 7-10 to implement camera
operation. Then you can click stop record button in Figure 7-11. Now
you have set one pattern.
The assistant items include: BLC, Digital zoom, night vision, camera
Assistant
brightness, flip.
You can select one option and then click start or stop button.
Please select matrix x and then input corresponding monitor output
Matrix
channel number, video input channel number. Then you can click
video switch button.
Light/wiper You can control the light and wiper of the peripheral device.

Color and More Setup

7.2.5
Color, Contrast, Video saturation and Monitor video hue setup interface are shown as in Figure
7-12.
© Copyright Qvis ®. All documentation rights reserved.
Move the camera to you desired location and then click left limit
button.
Then move the camera again and then click right limit button to
set a right limit.
Input auto tour value and preset value. Click add button, you
have added one preset in the tour.
Repeat the above procedures you can add more presets in one
tour.
Or you can click delete button to remove one preset from the
tour.
Figure 7-12 Color
102