Additional Function; Ipc Config - Qvis iBox nvr User Manual

Additional Function

7.4.4
7.4.4.1

IPC Config

IPC configuration interface is shown in Figure 7-57. Here you can set the gain, iris, brightness,
contrast, hue, saturation BLC, etc. of the network camera.
Please refer to the following sheet for detailed information.
Parameter
Brightness
© Copyright Qvis ®. All documentation rights reserved.
Figure 7-56 Preview Control
Figure 7-57 IPC Config
Function
This is to adjust the monitor window brightness. The value
ranges from 0 to 100. The default value is 50.
The larger the number, the brighter the video is. When you input
the value here, the bright section and the dark section of the
video will be adjusted accordingly. You can use this function
when the whole video is too dark or too bright. Please note the
video may become hazy if the value is too high. The
recommended value ranges are from 40 to 60.
138