Qvis iBox nvr User Manual page 135

Please refer to the following sheet for detailed information:
Parameter Function
Event type Motion detect, video loss and video masking
Select a channel from the dropdown list to set motion detect, video loss and
Channel
video masking function.
Sensitivity System supports 6 levels. The sixth level has the highest sensitivity.
Enable button Check the box to enable this function.
There are PAL22X18/NTSC22X15 small zones.
Blue area is the detection zone. Right click to view in full screen, click 'OK'
Region
before you exit to save the setup.
Period Here you can set for business day and non-business day.
Anti-dither Range: 0～600
Alarm output: s. When an alarm is triggered, the system enables peripheral alarm device.
Select the recording channel (Multiple choices). This channel will be activated
Record channel
to record when an alarm is triggered.
System can send out email to alert you when an alarm is triggered.
Send email
Tour Here you can enable tour function when an alarm is triggered.
Here you can set the PTZ movement when an alarm is triggered. Such as go
PTZ activation
to preset, tour & pattern when there is an alarm.
Capture You need to input capture channel number so that system can backup
snapshot file when an alarm occurs.
© Copyright Qvis ®. All documentation rights reserved.
Figure 7-42 Detect
126