Qvis iBox nvr User Manual page 130

Please refer to the following sheet for detailed information:
Parameter
Enable
Server IP
Port
Time Zone
Update Interval
Alarm Centre
Alarm centre interface is shown as below (see Figure 7-36).
Please input alarm centre server IP, port number. Once there is an alarm occurred, system can
notify the alarm centre as you specified here.
UNPN
Go to the UPnP interface, you will see an image as shown in (Figure 7-37).
It allows you to establish the mapping relationship between the LAN and the public network. Here
you can also add, modify or remove UPNP item.
© Copyright Qvis ®. All documentation rights reserved.
Function
Enable NTP function or not.
Server IP address
Server port. System supports TCP only and default port value
is 123.
Device current time zone.
Time update interval value.
Figure 7-36 Alarm Centre
121