Qvis iBox nvr User Manual page 124

16 channel 4poe network video recorders
Table of Contents

Advertisement

Parameter
Default Gateway
TCP Port
HTTP Port
RTSP port
UDP Port
Max Connection
Note: system will need to check the validity of all IPv6 addresses. The IP address and the default
gateway shall be in the same IP section. That is to say, the specified length of the subnet pre fix
shall have the same string.
For the IPv6 version, IP version, default gateway, preferred DNS and alternate DNS, the input
value shall be 128-digit. It cannot be left in blank.
Advanced setup
The remote host can choose multi-cast and PPOE to set. See Figure 7-30.
© Copyright Qvis ®. All documentation rights reserved.
Function
Here you can input the default gateway.
Default value is 37777. You can change if necessary.
Default value is 80.
Default value is 554.
Default value is 37778. You can change if necessary.
Network user max amount. The value ranges from 0 to 20.
O means there is no user can access current device.
Figure 7-30 Network
\
115

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Izeus nvrIboxIzeus

Table of Contents