Encode - Qvis iBox nvr User Manual


Snap times: Here you can set the snap picture amount with one click.
Important:
Since system time is very important, do not modify time casually unless you absolutely
need to!
Before you start any time modification, please stop recording operations first!
After completing all setups please click the save button, system goes back to the previous
menu.

5.6.2 Encode

Encode setting includes the following items (See Figure 5-24).
Please note some series do not support extra stream.

Channel: Select the channel you want.

Type: Please select from the dropdown list. There are four options: regular/motion
detect/alarm. You can set the various encode parameters for different record types.

Compression: System supports H.264, MPEG4, MJPEG and etc.

Resolution: The mainstream resolution type is IPC's encoding configuration; you can set it to
either D1, 720P or 1080P.

Frame rate: It ranges from 1f/s to 25f/s in PAL mode and 1f/s to 30f/s in NTSC mode.

Bit rate type: System supports two types: CBR and VBR. In VBR mode, you can set video
quality.

Quality: There are six levels ranging from 1 to 6. The sixth level has the highest image
quality, and level 1 having the lowest quality.

Video/audio: You can enable or disable the video/audio.
© Copyright Qvis ®. All documentation rights reserved.
Figure 5-24
38