Qvis iBox nvr User Manual page 78

10. Stop bits: select corresponding stop bits. Default value is 1.
11. Parity: there are three options: Odd/Even/None. Default setup is none.
12. After completing all of the setup please click 'Save' button.
In one window display mode, right click mouse (click Fn Button in the front panel or click Fn
key in the remote control).
Click Pan/Tilt/Zoom, the interface is shown as below. See Figure 5-64.
Here you can set the following items:

Step (value ranges from 1 to 8)

Zoom

Focus

Iris
Please click icon and
In Figure 5-64, please click direction arrows to adjust PTZ position. There are total 8 direction
arrows.
© Copyright Qvis ®. All documentation rights reserved.
Figure 5-63
to adjust zoom, focus and iris.
Figure 5-65
Figure 5-64
69