Er Xenpak - Extreme Networks BlackDiamond 8800 Series Hardware Installation Manual

Extreme Networks Optics
Table 67 lists specifications for the LR XENPAK module.
Table 67: LR XENPAK module specifications
Parameter
Average launch power
Optical link budget
Wavelength range
Distance range
Maximum receiver sensitivity in OMA
NOTE
The launch power (measured using the average power method used by power meters) is measured at the factory. The
average launch power minimum value is provided as a reference, not a pass/fail criterion.

ER XENPAK

The ER XENPAK supports SMF and has SC connectors.
The ER XENPAK requires the software versions listed in
Table 68: ER XENPAK software requirements
Switch Model
BlackDiamond Switches
BlackDiamond 10808
BlackDiamond 8800 series
BlackDiamond 12804
BlackDiamond 12802
Summit Switches
Summit X450 series
Summit X450a series
Summit X450e series
Table 69 lists specifications for the ER XENPAK module.
Table 69: ER XENPAK module specifications
Parameter
Average launch power
Optical link budget
Wavelength range
Distance range:
5 dBm attentuation
Maximum receiver sensitivity in OMA
356
Minimum
-7.3 dBm
1260 nm
2 m
Required Software
ExtremeXOS 11.1.1 or later
ExtremeXOS 11.1.1 or later
ExtremeXOS 11.4 or later
ExtremeXOS 12.0 or later
ExtremeXOS 11.2.0 or later
ExtremeXOS 11.2.0 or later
ExtremeXOS 11.2.0 or later
Minimum
-4.7 dBm
1530 nm
2 m
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
Maximum
0.5 dBm
6.2 dB
1355 nm
10 km
-12.6 dBm
Table 68.
Maximum
4.0 dBm
10.9 dB
1565 nm
40 km
-14.1 dBm