Extreme Networks BlackDiamond 8800 Series Hardware Installation Manual page 97

Figure 46: Removing contents from the upper BlackDiamond 8810 shipping carton
3 Release the clip locks as shown in
a Place your thumb and index finger inside the clip lock touching the prongs.
b Squeeze the prongs inward applying equal pressure on each side.
c Pull the prongs outward until the clip lock is released from the carton.
d Repeat steps 3a through 3c to release each of the remaining clip locks.
Figure 47: Clip locks on the BlackDiamond 8810 shipping carton
Clip lock
4 Lift the BlackDiamond 8810 shipping carton up and off the chassis.
5 Remove all four restraining bolts that hold the BlackDiamond 8810 chassis to the four shipping
brackets on the shipping pallet (see
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
ASP024
Figure 47.
Squeeze prongs
to unlock
Figure 48).
Unpacking the BlackDiamond 8810 Chassis
Open
lock
EX_087B
97